1X18YD 78.2 Mil White foamed acrylic tape with a red PE liner that is ideal for all around bonding in the most demanding of applications. Cross to 3M 4912.
This product is plasticizer-resistant, but we do recommend a primer to help anchor the adhesive on soft or hard to stick to plastics. -40 to 320 degrees THIS ITEM CAN BE DROP SHIPPED IN 3-5 DAYS.
Tapelady's Note: UHB tapes are a unique product in that they are designed to perform the job that a screw, weld, rivet, or epoxy was previously used to do. It is extremely permanent. Do not use this product if you are going to want to remove it later. You would have to saw it in half to get it off! They can be used outdoors because they are weather, UV, vibration, and temperature resistant. When you first observe this tape, it will feel like it isn't very sticky to the human skin. It isn't. When you apply it to a substrate, it takes about 72 hours for it to flow into the nooks and crannies of the surface. Once it has, it becomes a permanent part of that surface. I strongly advise that the surface be cleaned thoroughly to remove dust and oils. This will ensure the best bond for the adhesive. A 50/50 mix of water and isopropyl alcohol usually does the job. Citrus-based cleaners are excellent, too.